The J.W.Winco series LRHS have a rest position where the plunger can stay in the retracted position.

• Stainless Steel Plunger Pin
• Thread: 3/8 x 16

The J.W.Winco series LRHS have a rest position where the plunger can stay in the retracted position.

• Stainless Steel Plunger Pin
• Thread: 1/2 x 13

The J.W.Winco series LRHS have a rest position where the plunger can stay in the retracted position.

• Stainless Steel Plunger Pin
• Thread: 1/2 x 13

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.5 is used in applications which require surface mounting.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90� after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90� after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90� after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN608.6 is used in applications which require surface mounting, and the plunger has to stay in its retracted position. To achieve this, the knob is rotated 90� after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position.

• Stainless Steel Plunger Pin
• Zinc Die-Cast Plate Mount
• Lock-Out

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M10