The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN822 feature small, compact dimensions. They are designed for installation in thin walled sheet metal applications. Plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

• Stainless Steel Plunger Pin
• Thread: M10

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Thread: M12

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M12

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Stainless Steel Lock Nut
• Thread: M16

The J.W.Winco series GN613 are a low cost alternative with reduced dimensions. Indexing plungers with threaded spindle are for applications where a special knob to customer's request or own design is required or for such cases where the spindle is linked direct to an operating mechanism.

• Stainless Steel Plunger Pin
• Thread: M16

The J.W.Winco series GN607 are standard units used for wide range of indexing applications where the threaded body needs to be reduced to a minimum.

• Stainless Steel Plunger Pin
• Thread: M16