60m (200') 5 conductor high temperature cable with 5-pin bayonet connector, for use with coolable housing

7.7m (25') 7 conductor cable with 7-pin DIN connector, for use with "C" option

7.7m (25') 7 conductor high temperature cable with 7-pin DIN connector, for use with "C" option

15m (50') 7 conductor cable with 7-pin DIN connector, for use with "C" option

15m (50') 7 conductor high temperature cable with 7-pin DIN connector, for use with "C" option

4m (13') spare sensor cable

The GPC temperature monitor provides a compact easy to use interface and display for process instruments, comes with standard 5 VDC alarm outputs.

• Outputs: 4-20 mA, Type J, Type K, Type E, Type N, Type R, Type S, Type T

The GPC temperature monitor provides a compact easy to use interface and display for process intruments, comes with 3A mechanical alarm outputs, fully isolated electrical inputs and outputs.

• Outputs: 4-20 mA, Type J, Type K, Type E, Type N, Type R, Type S, Type T

Raytek air purge jacket that is pre-installed onto a MI3-LTS or MI3-LTH Raytek Sensor. Used to keep dust, moisture, airborne particles,and vapors away from the sensing head. **Must be ordered with MI3 Sensor.

• Withstands ambient temperatures up to 180�C (356�F)
• Limited use for cooling purposes
• Recommended air flow rate is 30 to 60 l / min (0.5 to 1 cfm). (max. pressure is 5 bar)

The multi-channel box can be used for all communication boxes. The box includes 8 sets of field wiring terminals wired in parallel to one 5 m (16 ft) cable set to connect to the communication box. The box can withstand ambient temperatures of up to -4 to 212 F (-20 to 100 C).

Replacement laser switch box for GPS sensors

• Built-to-Order

The Raytek XXXMIACCJ is a air cooling system for the MI3 series sensor and allows the unit to operate at temperatures up to 392 F (200 C). The air‐cooling system comes with a 0.8m insulated hose and T‐adapter which allows for a air‐cooling hose to be installed without interrupting the connections to the box.