The Saginaw series Enviro-Therm Air Conditioners are designed with an internal closed loop system to provide protection from dust, oil and water. These small rugged units provide many indoor and outdoor applications.

• 8500 Btu/h
• 230 VAC
• Side-Mount
• Mild Steel Housing
• NEMA 3, 3R, 4 & 12
• UL, CE, IEC, cUL

The Saginaw series Enviro-Therm Air Conditioners are designed with an internal closed loop system to provide protection from dust, oil and water. These small rugged units provide many indoor and outdoor applications.

• 8500 Btu/h
• 230 VAC
• Side-Mount
• 304 SS Housing
• NEMA 3, 3R, 4, 4X & 12
• UL, CE, IEC, cUL

The Saginaw series Enviro-Therm Air Conditioners are designed with an internal closed loop system to provide protection from dust, oil and water. These small rugged units provide many indoor and outdoor applications.

• 8500 Btu/h
• 230 VAC
• Side-Mount
• 316 SS Housing
• NEMA 3, 3R, 4, 4X & 12
• UL, CE, IEC, cUL

The Saginaw series Enviro-Therm Air Conditioners are designed with an internal closed loop system to provide protection from dust, oil and water. These small rugged units provide many indoor and outdoor applications.

• 8500 Btu/h
• 460 VAC
• Side-Mount
• Mild Steel Housing
• NEMA 3, 3R, 4 & 12
• UL, CE, IEC, cUL

The Saginaw series Enviro-Therm Air Conditioners are designed with an internal closed loop system to provide protection from dust, oil and water. These small rugged units provide many indoor and outdoor applications.

• 8500 Btu/h
• 460 VAC
• Side-Mount
• 304 SS Housing
• NEMA 3, 3R, 4, 4X & 12
• UL, CE, IEC, cUL

The Saginaw series Enviro-Therm Air Conditioners are designed with an internal closed loop system to provide protection from dust, oil and water. These small rugged units provide many indoor and outdoor applications.

• 8500 Btu/h
• 460 VAC
• Side-Mount
• 316 SS Housing
• NEMA 3, 3R, 4, 4X & 12
• UL, CE, IEC, cUL

The Saginaw Control & Engineering SCE-10P10SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Stainless Steel Material
• Thickness: 0.08
• Finish: Brushed
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-10P8SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Stainless Steel Material
• Thickness: 0.08
• Finish: Brushed
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-12P10SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Stainless Steel Material
• Thickness: 0.08
• Finish: Brushed
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-12P12SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Stainless Steel Material
• Thickness: 0.08
• Finish: Brushed
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-14P12SS back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Stainless Steel Material
• Thickness: 0.08
• Finish: Brushed
• Compatible with Saginaw Control & Engineering series enclosures.