The Saginaw Control & Engineering SCE-1008FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-1008FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10086FG is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10086FW is designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents and require unrestricted viewing of gauges or controls.

• Hinged (Single Door)
• Flange
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw SCE-HF1251A is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.

• 16 CFM
• Heat discharge at top
• Includes heat indicator switch
• Fan/Auto switch

The Saginaw SCE-HF1252A is designed to protect electrical controls, instruments and sensitive components from low temperatures and the effects of condensation and corrosion by maintaining a stable temperature within the electrical enclosure. These heaters are not intended for use in hazardous, wet, dusty or dirty locations.

• 16 CFM
• Heat discharge at top
• Includes heat indicator switch
• Fan/Auto switch

The Saginaw Control & Engineering SCE-121010SC is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. Provides protection from dust, oil and water.

• Lift-Off
• Flange
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-12N1004LP is designed to house electrical controls, instruments and components in areas that do not require oil, water and dust tight protection.

• Hinged (Single Door)
• Pre-drilled mounting holes (flange mounts sold separately)
• ANSI 61 Gray
• NEMA Type 1

The Saginaw Control & Engineering SCE-12R104 is designed to house electrical controls, instruments and components in an outdoor environment.

• Hinged (Single Door)
• Feet
• ANSI 61 Gray
• NEMA Type 3R

The Saginaw Control & Engineering SCE-1210CHNF is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. Provides protection from dust, dirt, oil and water.

• Hinged (Single Door)
• Flange
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-1210CHSNF is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. Provides protection from dust, dirt, oil and water.

• Hinged (Single Door)
• Flange
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13

The Saginaw Control & Engineering SCE-1210SC is designed for use as electrical junction boxes, terminal wiring boxes, instrument housings, and electrical control enclosures. Provides protection from dust, oil and water.

• Lift-Off
• Flange
• ANSI 61 - Gray
• NEMA Type 3R, 4, 12 and 13