The Stego MFR 012 series hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.

• Mechanical Adjustable Hygrostat
• Humidity Setting: 35-95% RH
• Mounting: DIN Rail

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 40-140 F
  Setting Range (NO): 40-140 F

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The FZK 011 mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices where a higher degree of sensing accuracy is required. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.

• AdjustableThermostat
• Setting Range (NC): 5-60 C
  Setting Range (NO): 5-60 C

The flat LED light SL 025 with on/off switch and motion detector is ideal for use in cabinets and casings with electrical/electronic components with a high component density. It can be fixed on the narrow or wide side with screws, or with magnet fixing at any desired position in steel cabinets without any installation effort.

• 560 Lumens
• Magnet or Screw Mounting
• On/Off switch and Motion Detection
• 100-120V AC

Stego's FFH 086 series, Filter Fan Rainhood 08671.0-00 is designed to increase the protection class and serves as a protective cover for filter fans, intake and exit filters. Used for protection against water projected by a hose and extreme climactic influences if located outdoors or in industrial applications with harsh enviornmental conditions. Compatible with FPI 018, FPO 018 and FF 018 filter fan series.

• Increase of protection class
• Safe against unauthorized removal
• Filter mat change from outside
• Weather/Impact-resistant

Stego's FFH 086 series, Filter Fan Rainhood 08672.0-00 is designed to increase the protection class and serves as a protective cover for filter fans, intake and exit filters. Used for protection against water projected by a hose and extreme climactic influences if located outdoors or in industrial applications with harsh enviornmental conditions. Compatible with FPI 018, FPO 018 and FF 018 filter fan series.

• Increase of protection class
• Safe against unauthorized removal
• Filter mat change from outside
• Weather/Impact-resistant

Stego's FFH 086 series, Filter Fan Rainhood 08673.0-00 is designed to increase the protection class and serves as a protective cover for filter fans, intake and exit filters. Used for protection against water projected by a hose and extreme climactic influences if located outdoors or in industrial applications with harsh enviornmental conditions. Compatible with FPI 018, FPO 018 and FF 018 filter fan series.

• Increase of protection class
• Safe against unauthorized removal
• Filter mat change from outside
• Weather/Impact-resistant

Stego's FFH 086 series, Filter Fan Rainhood 08674.0-00 is designed to increase the protection class and serves as a protective cover for filter fans, intake and exit filters. Used for protection against water projected by a hose and extreme climactic influences if located outdoors or in industrial applications with harsh enviornmental conditions. Compatible with FPI 018, FPO 018 and FF 018 filter fan series.

• Increase of protection class
• Safe against unauthorized removal
• Filter mat change from outside
• Weather/Impact-resistant

Stego's FFH 086 series, Filter Fan Rainhood 08670.0-00 is designed to increase the protection class and serves as a protective cover for filter fans, intake and exit filters. Used for protection against water projected by a hose and extreme climactic influences if located outdoors or in industrial applications with harsh enviornmental conditions. Compatible with FPI 018, FPO 018 and FF 018 filter fan series.

• Increase of protection class
• Safe against unauthorized removal
• Filter mat change from outside
• Weather/Impact-resistant

The Stego 08635.0-00 is a set of (5) replacement media filters for the FPI 018 Filter Fan series.

The REX 011 is a durable thermostat designed for hazardous environments, ensuring reliable temperature control and safety compliance.

• Normally-Closed (NC)
• Halogen-free silicone cable (1m)