Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T5 (212 ?F / 100 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T5
• Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T5 (212 ?F / 100 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T5
• Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The CSF 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The CS 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value.

• DIN Mounting
• I (grounded) / IP20
• UL File No. E150057, VDE, EAC

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 230 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum

Stego's CP061 series flat heater is used to provide an evenly distributed temperature within enclosures and cabinets with electric/electronic components. Its ultra-thin design makes it particularly suitable for high-density applications for which standard enclosure heaters are often too big in size. Depending on the application, the Flat Heater can be used as a convection heater or as a contact heater. When used as a contact heater it offers thermoconductive contact to a component or a cabinet wall in need to be heated.

• 120 VAC
• 100W Heating Capacity
• Screw Mount
• Aluminum Aluminum