The Saginaw Control & Engineering SCE-3PBFG is designed for indoor or outdoor use to house pushbuttons, switches, and pilot lights in areas that may be regularly hosed down, are in very wet conditions, or are exposed to corrosive agents.

• Lift-Off
• Wall
• RAL 7035 Light Gray
• NEMA Type 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-6PBGX is designed to offer protection for miniature oil tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

• Lift-Off
• Flange
• ANSI 61 - Gray
• NEMA Type 4, 12 and 13

The Saginaw Control & Engineering SCE-9PBGX is designed to offer protection for miniature oil tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

• Lift-Off
• Flange
• ANSI 61 - Gray
• NEMA Type 4, 12 and 13

The Saginaw Control & Engineering SCE-806PCW is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X, 12 and 14

The Saginaw Control & Engineering SCE-806PC is designed for indoor or outdoor use to house electrical and electronic controls, instruments and components in areas that may be regularly hosed down or are in very wet conditions.

• Hinged (Single Door)
• Feet
• RAL 7035 Light Gray
• NEMA Type 3R, 4, 4X, 12 and 13

The Saginaw Control & Engineering SCE-10P8AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-12P10AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-12P12AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-14P12AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-14P8AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-16P10AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-16P14AL back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Aluminum Material
• Thickness: 0.08
• Finish: Natural
• Compatible with Saginaw Control & Engineering series enclosures.