Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Intake and exhaust hoods prevent direct infiltration
• High air volume
• Minimal mounting depth
• UV resistant plastic

The Stego RFP 018 series are used in enclosures from which warm air must be diverted due to increased heat development. The ready-to-connect and low-noise roof filter fan is used to expel warm air from within the enclosure. Alternatively, the roof exhaust filter provides passive ventilation.

• Minimal mounting depth
• Very low noise
• High air volume
• Time-saving installation and mat exchange

The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent failure of electronic components caused by condensation and corrosion.

• DIN Mounting
• I (grounded) / IP44
• UL File No. E234324, EAC

The CSK 060 is a touch-safe heater for use in enclosures. The design of the heater utilizes natural convection which results in a circulating current of warm air.

• DIN Mounting
• II (double insulated) / IP20
• UL File No. E150057, VDE, EAC

The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent failure of electronic components caused by condensation and corrosion.

• DIN Mounting
• I (grounded) / IP44
• VDE, EAC

Stego's Varioline 021/022 series, 02210.0-00 is a powerful and compact LED light for use in enclosures. Its LED tube emits more than 1,000/1,700 Lm at only 11 W/16 W power consumption, thereby illuminating even very large enclosures in their full depth and height. The glare-free, 360? rotatable LED tube uses Mid-power LEDs with a service life of 60,000 h. The emitted daylight color of 6,500 K provides safety for the user by a natural and non-fading colorreproduction.

• High luminous flux
• Motion Sensor
• Screw fixing
• Durable and maintenance-free LED technology

Stego's Varioline 021/022 series, 02200.0-00 is a powerful and compact LED light for use in enclosures. Its LED tube emits more than 1,000/1,700 Lm at only 11 W/16 W power consumption, thereby illuminating even very large enclosures in their full depth and height. The glare-free, 360? rotatable LED tube uses Mid-power LEDs with a service life of 60,000 h. The emitted daylight color of 6,500 K provides safety for the user by a natural and non-fading colorreproduction.

• High luminous flux
• On/Off switch
• Screw fixing
• Durable and maintenance-free LED technology

The CSF 028 fan heater prevents formation of condensation and provides evenly distributed interior air temperature in enclosures. The touch-safe plastic housing and the small size makes it ideal for use in enclosures with a high packing density.

• 32 CFM
• DIN Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E234324, EAC

The CSF 028 fan heater prevents formation of condensation and provides evenly distributed interior air temperature in enclosures. The touch-safe plastic housing and the small size makes it ideal for use in enclosures with a high packing density.

• 32 CFM
• Screw Mounting
• Fixed Thermostat
• II (double insulated) / IP20
• UL File No. E234324, EAC