The RC 016 small heaters are designed to prevent condensation and to ensure a minimum operating temperature in small enclosures.

• Screw Mounting
• II (double insulated) / IP54
• UL File No. E234324, VDE, EAC

The Stego FF 018 series are used to provide an optimum climate in enclosures. The interior temperature of an enclosure can be reduced by channeling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting air flow prevents formation of localized heat pockets and protects the electronic components from overheating.

• Direction of air flow can be switched
• Intake and exhaust hoods prevent direct infiltration
• Self-adhesive seal
• Air channeling allows for quiet operation

The Stego FF 018 series can be used in outdoor enclosures where warm air has to be dissipated. A protection type of IP55 is achieved due to the special design of the hood and the use of fine filter mats. The plastic used for the hood of this filter fan is highly weather and UV light resistant.

• Weather and UV resistant
• Lockable outer door
• Quick and easy filter change
• Impact resistant

The Stego FPO 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPO - Airflow direction out
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

The Stego FPI 018 series are used to provide cooling by forced air-circulation in enclosures and cabinets containing eletrical/electronic and other components. The interior temperature of an enclosure can be reduced by channelling cooler, filtered outside air into the enclosure, thus expelling hot inside air.

• FPI - Airflow direction in
• New air-flap outlet technology for high airflow
• Single filter mat system design
• Easy mounting

Stego's Varioline 021/022 series, 02120.0-00 is a powerful and compact LED light for use in enclosures. Its LED tube emits more than 1,000/1,700 Lm at only 11 W/16 W power consumption, thereby illuminating even very large enclosures in their full depth and height. The glare-free, 360? rotatable LED tube uses Mid-power LEDs with a service life of 60,000 h. The emitted daylight color of 6,500 K provides safety for the user by a natural and non-fading colorreproduction.

• High luminous flux
• Integrated power unit
• Screw fixing
• Durable and maintenance-free LED technology

Stego's Varioline 021/022 series, 02110.0-00 is a powerful and compact LED light for use in enclosures. Its LED tube emits more than 1,000/1,700 Lm at only 11 W/16 W power consumption, thereby illuminating even very large enclosures in their full depth and height. The glare-free, 360? rotatable LED tube uses Mid-power LEDs with a service life of 60,000 h. The emitted daylight color of 6,500 K provides safety for the user by a natural and non-fading colorreproduction.

• High luminous flux
• Motion Sensor
• Screw fixing
• Durable and maintenance-free LED technology

Stego's Varioline 021/022 series, 02100.0-00 is a powerful and compact LED light for use in enclosures. Its LED tube emits more than 1,000/1,700 Lm at only 11 W/16 W power consumption, thereby illuminating even very large enclosures in their full depth and height. The glare-free, 360? rotatable LED tube uses Mid-power LEDs with a service life of 60,000 h. The emitted daylight color of 6,500 K provides safety for the user by a natural and non-fading colorreproduction.

• High luminous flux
• On/Off switch
• Screw fixing
• Durable and maintenance-free LED technology

The compact HVL 031 high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 20 CFM
• DIN Mounting
• I (grounded) / IP20
• UL File No. E187294, EAC

The compact HVL 031 high-performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures.

• 20 CFM
• DIN Mounting
• I (grounded) / IP20
• UL File No. E187294, EAC, VDE

Compact convection heater of temperature class T3 (392 ?F / 200 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T3
• DIN Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC

Compact convection heater of temperature class T4 (275 ?F / 135 ?C max.) for use in hazardous areas for prevention of formation of condensation, temperature fluctuations, and for protection against frost in control and switch cabinets, as well as in measuring equipment.

• Temperature Class T4
• Screw Mounting
• IP66 / I (grounded)
• EPS 16 ATEX 1 109 X IECEx EPS 16.0048X EAC