The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 32-140 F
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail

The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact.

• Electronic AdjustableThermostat
• Setting Range (NC): -20-60 C
  Setting Range (NO): -20-60 C

The ETR 011 electronic thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat senses the surrounding air temperature and can switch both resistive and inductive loads via an SPDT contact.

• Electronic AdjustableThermostat
• Setting Range (NC): -4-140 F
  Setting Range (NO): -4-140 F

The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

• Electronic AdjustableThermostat
• Setting Range (NC): 0-60 C
  Setting Range (NO): 0-60 C

The ET 011 is an electronic thermostat for regulating high performance DC 24 V equipment. Heating or cooling equipment, as well as signal devices, can be switched via the SPDT (change-over) contact. A relatively small hysteresis sets the ET 011 Thermostat apart from less accurate mechanical thermostats.

• Electronic AdjustableThermostat
• Setting Range (NC): 32-140 F
  Setting Range (NO): 32-140 F

The Stego FPI 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• Air-flap outlet technology

The Stego FPI 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• Air-flap outlet technology

The Stego EF 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• 3.8 x 3.8" cutout

The Stego EF 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• 4.9 x 4.9" cutout

The Stego EF 11821 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• 4.9 x 4.9" cutout

The Stego FPI 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• Air-flap outlet technology

The Stego EF 118 series exhaust filter can be used for FPO or FPI systems. The FPI System consists of a filter fan and and an exhaust filter. The FPO System consists of an exhaust filter fan and an intake filter.

• Exhaust Filter
• Airflow direction in
• 6.9 x 6.9" cutout