Stego's KTS 111 series 11101.0-02 is a normally open (NO) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact maker for regulating of filter fans and heat exchangers or for switching signal devices when temperature limit has been reached. The contact closes when temperature is rising. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.

• Temperature Range: +20 to +80 °C
• Safe wiring with push-in connection terminal
• Faster and tool-free wiring
• Easy adjustability of switch temperature setting

Stego's KTS 111 series 11101.9-01 is a normally open (NO) small compact mechanical thermostat for use up to 5,000 meters in altitude, thanks to the optimized air gap and increased creepage distance. It features a contact maker for regulating of filter fans and heat exchangers or for switching signal devices when temperature limit has been reached. The contact closes when temperature is rising. By use of push-in terminals the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose.

• Temperature Range: +14 to +122 °F
• Safe wiring with push-in connection terminal
• Faster and tool-free wiring
• Easy adjustability of switch temperature setting

The Stego MFR 012 series hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.

• Mechanical Adjustable Hygrostat
• Humidity Setting: 35-95% RH
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 230 VAC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 120 VAC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Fixed Hygrostat
• Humidity Setting: 65% RH
• Operating Voltage: 230 VAC
• Mounting: DIN Rail

The Stego EFR 012 series hygrostat senses the relative humidity in an enclosure and turns on a heater at the set point, helping prevent the formation of condensation in the enclosure.

• Electronic Fixed Hygrostat
• Humidity Setting: 65% RH
• Operating Voltage: 120 VAC
• Mounting: DIN Rail

The Stego EFL 012 series hygrostat is used for controlling heating and cooling equipment, filter fans or signal devices through the Relay SM 010 or a similar device. The hygrostat registers the surrounding relative humidity and can switch a signal current via an internal relay with a potential free change-over contact.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
• Operating Voltage: 12-48 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 °F (+5 °C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 °F (+5 °C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego DCF 010 series hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external sensor can be positioned freely anywhere in the control cabinet for precise measurement of the atmospheric humidity.

• Electronic Adjustable Hygrostat
• Humidity Setting: 40-90% RH
  Temperature Setting: +41 °F (+5 °C) pre-set
• Operating Voltage: 20-56 VDC
• Mounting: DIN Rail

The Stego ETF 012 series electronic hygrotherm senses the ambient temperature and relative humidity in an enclosure with electric/electronic components and turns on a heater (or alternatively a fan) at either set point, helping prevent the formation of condensation in the enclosure. Due to its wide voltage range the hygrotherm can be utilised anywhere in the world.

• Temperature Setting: 0-60 C
  Humidity Setting: 50 to 90 % RH
• Operating Voltage: 100-240 VAC
• Mounting: DIN Rail